[Flash 10 is required to watch video]
Part II of our Nut Extraction Tutorial!
Jen is removing the wedge plunger nut. A total of 6 screws must be removed before pulling out the wedge plunger nut that contains the blank draw nut.
- Remove 6 screws surrounding the wedge plunger nut.
- Pull out the wedge plunger nut that contains the adapter nut.
- Push the adapter nut out of the center of the wedge plunger nut.
Take caution with the nut extraction — there is a ball socket and spring that may pop out at you. This below to the side flange of the adapter nut.
Enjoy the video!
